How Do I Setup My Talktalk Wireless Router?

To setup your Talktalk wireless router, you simply have to follow the simple steps listed below. These steps differ depending on the brand of your router, and are listed here according to each brand. The different brands listed below are the main router brands that Talktalk provides service for.

D-link Wireless Routers:

The D-link models supported by Talktalk are DSL-2680, DSL-2780, DSL-2640R,and DSL-2740R.

1. Connect your router to your computer using an Ethernet cable and to the phone socket using a microfilter.
2. Open a web browser. Type http://192.168.1.1 in the address bar.
3. Use “admin” as both the username and password when asked. These are for the router, not for Talktalk.
4. On the left side of the screen, click the “Quick Start” button.
5. Enter your Talktalk username and password. These details are written in your Talktalk welcome letter. In case the letter is unavailable, you can call the number 0870 0875 562 for assistance. You can only call this number using a Talktalk phone.
6. After entering your details, click “Connect.”
7. Click “OK” to save the settings.
8. Go to www.talktalk.co.uk to make sure you were able to connect successfully.

Huawei Wireless Routers:

The different Huawei models are HG521, HG532, EchoLife HG520b, EchoLife HG520s, and SmartAX MT882.

1. Make sure that the microfilter is plugged into the master phone socket, and that the phone is attached to the port of the microfilter.
2. Using the ADSL cable, connect the router to the microfilter.
3. Turn the router on and wait for the ADSL light to be on solid.
4. Follow steps 3 to 8 of the D-link installation.

Netgear Wireless Routers:

The different Netgear models are DGN2000, DG834G, and DG834PN.

1. Follow steps 1 and 2 of the Huawei installation.
2. Connect your computer to the router using an Ethernet cable.
3. Turn the router on and wait for the ADSL to light up.
4. Follow steps 2 and 3 of the D-link installation.
5. On the left side of the screen, click “Basic Settings”.
6. Type in your Talktalk username and password.
7. Make sure that these settings are correct before clicking “Apply”:
• Encapsulation is set to PPoA (PPP over ATM)
• Internet IP Address is set to Get Dynamically from ISP
• Domain Name Server (DNS) is set to Get Automatically from ISP
8. On the left side of the screen, click “ADSL Settings.” Check that the settings are:
• Multiplexing Method is set to VC-BASED
• VPI is set to 0
• Domain Name Server (DNS) is set to Get Automatically from ISP
• DSL Mode is set to Auto (Multi-mode)
9. Click on “WAN Setup” on the left side of the screen. Enter 1432 in the MTU Size field and then click “Apply.”

Philips Wireless Routers:

These steps work for both Philips SNK5630NS/05 and Philips SNK5630NS/05.

1. Follow steps 1 and 2 of the D-link installation.
2. Click the “Home” button located on the upper right corner of the screen.
3. On the left side of the screen, click ADSL/Internet Settings. Then, select ISP Settings.
4. From the Protocol drop-down list, choose PPPoA.
5. Type 0 and 38 into the VPI/VCI boxes.
6. Choose VC MUX from the Encapsulation drop-down list and UBR from the QoS Class drop-down list.
7. Enter these settings:
• PCR- 4000
• SCR- 4000
• MBS- 10
8. Select “Yes” from the ISP drown-down list.
9. In the IP Address and Subnet Mask boxes, type 0.0.0.0
10. Choose “Always Connected” from the Connect Type drop-down list, and type 30 into the Idle Time (Minutes) box.
11. Type in your Talktalk username and password. These details are written on your Talktalk welcome letter.
12. Type 1432 in the MTU box.
13. Click “Save Settings.”

You can try consulting your router’s manual or its manufacturer for further details.

Looking on how to setup your TalkTalk wireless broadband router for your home then visit TheProductSite.com (http://www.theproductsite.com) for expert friendly advice that will explain to you which wireless router is the best for your needs. The Product Site aims to help customers find the best wireless routers for them by offering a needs-oriented shopping experience. The site also offers a range of router articles, tips, and materials to guide shoppers on finding the right type of router and ISP for them for streaming TV shows, downloading films or online gaming needs.

One thought on “How Do I Setup My Talktalk Wireless Router?

  1. A router is a gateway as well as a wireless access point that connects two devices on your local area network. Having your Netgear wireless router as an internet gateway makes it possible to connect computers and devices to your high speed modem.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>